Automatic rotor winding machine is generally used for processing flat wire

Winding is actually very difficult for the staff, but this type of work often requires a long time to perform repeated actions, so the actual overall strength is not low. In the winding operation, the flat wire is particularly difficult to form due to its hardness and other reasons, so the winding is particularly difficult. Later, with the emergence of fully automatic rotor winding machines, most flat wires will be wound mechanically instead of manually.

     The winding accuracy of the automatic rotor winding machine is much higher than that of manual operation, no matter in the wiring or the position. It can be said that the automatic rotor winding machine fully realizes the automatic arranging of the flat wire, and can carry out operations such as adding insulation paper and tapping the coil through a special control system.

     And because the automatic rotor winding machine is electric driven, the tension brought by it can make the flat wire quickly formed, which provides strong support for improving the quality and aesthetics of the flat wire coil. It can be seen that the flat wire coil processed by the automatic rotor winding machine has a very high density.