The service life of commutator spot welding machine will be affected by the user's usage and maintenance level to a large extent, and in the specific use and maintenance, the cooling system is a very important part.
For the maintenance of commutator spot welding machine, we must first start with the cooling system. The internal water flow should be checked daily to check whether it is unblocked, whether there is water leakage, whether the electrode and the grip bar are overheated. For more detailed areas, you can check once a month whether it is unblocked. For the internal water pipes, debris and scale should be removed in time. And to ensure that the water pipe joints are normal to prevent leakage.
In addition, the commutator spot welding machine also needs to check specific components such as transformers and thyristors. The inspection of these components requires specific planning based on the frequency and method of use of the commutator spot welding machine, but it also needs to be regular.
LAST：Motor rotor winding machine is not suitable for high-intensity operation
NEXT：A common use place for magnetizer
What data needs to be provided to choose a suitable energy magnetizer2020-07-27
Main points of wire arrangement technology of automatic winding machine2020-07-27
The role of magnetizer in the operation of generators and motors2020-07-27
Inspection method for overheating of commutator spot welding machine2020-07-27
Advantages of auto fuel pump automatic inspection machine2020-07-27
Copyright @ 2013 Shuanghong Automation Equipment Co., Ltd All Rights Reserved 浙ICP备11039074号-1
