Functional components of a new type of fully automatic rotor winding machine

       The new automatic rotor winding machine has the following functional components:

       1. Two symmetric winding arms capable of winding at the same time, the rotation directions of the two are opposite when viewed from one direction. The winding arm is driven by a DC servo motor, which is convenient for speed regulation.

       2. It can clamp the iron core, has a clamp that can slide the wire into the groove and guide the wire hook, and a mechanism for clamping and separating the clamp. The clamping hook thread mechanism is driven by an air cylinder, which is very convenient for processing and control.

       3. Indexing and positioning device capable of holding the rotor shaft for indexing and positioning, one rotation. The indexing positioning drive adopts a low-speed synchronous motor, which has large torque, is cheap, and is easy to control when combined with a PC.

       4. The control part that can reliably control the coordinated actions of each part. Because there are many parts to be controlled and complex actions, a programmable controller can be used as its core part, with operating buttons and photoelectric sensors to control solenoid valves and contactors, and make each motor and cylinder act.

  The value brought by the production of automatic rotor winding machine