ARTICLE

PRODUCT CENTER

ARTICLE

Related instructions for commutator spot welding machine

      The commutator spot welder is a power frequency electric cathode spot welder, which is mainly used for welding the armature winding coil and the commutator commutator. Commutator spot welding machine has the characteristics of good welding quality, high efficiency, convenient maintenance, etc., which is very suitable for power tool manufacturers and micro motor manufacturers. After purchasing a new commutator spot welding machine, the customer needs to know the following to use it.

     1. Unpacking inspection

     After opening the packing box, you need to check that the files in the box are consistent with the real thing, and then check whether the appearance of the case and the panel are intact.

     2. Voltage, frequency and ground wire

     Check the power supply voltage and frequency on the equipment nameplate.

     3. Understand the relevant operations of the control panel

     4. The manual switch is connected with the spot welding control system. When the switch close command is issued, the welding machine automatically welds.

     5. Understand the relevant parameters and operations of each panel.

     6. Adjust the commutator spot welding machine and put it into work.


整流子点焊机


LAST:Magnetizing machine-related problems

NEXT:Commutator precision turning machine is a professional processing equipment

Keep in touch with us at all times, we will serve you wholeheartedly!

CONTACT US

Copyright @ 2013 Shuanghong Automation Equipment Co., Ltd All Rights Reserved   浙ICP备11039074号-1