Safe production-precautions for the operation of automatic rotor winding machine

   In order to respond to the country’s safe production work, the following briefly introduces how to safely operate the fully automatic rotor winding machine:

     1. Basic requirements

     The operator should dress well, if it is a female, he must tie her hair tightly. Do not work with gloves.

     2. Operational requirements

     1. Before starting the machine, check the table surface of the automatic rotor winding machine carefully, and it must be free of debris. Check whether the screws on the machine are loose, whether the power supply is well connected, etc., and then start the machine after confirming that it is qualified. If you find a fault, you need to find a technician to solve it in time.

     2. After turning on the machine, let the machine run idling again, and check whether the machine's wiring, winding turns, etc. meet the requirements. If not, repeat the above steps and re-adjust until it is qualified.

     3. When the automatic rotor winding machine is running at high speed, it is strictly forbidden to touch the moving parts and operate in strict accordance with the operating specifications.

     4. If abnormal noise occurs during the operation, the machine should be shut down immediately and let the maintenance personnel inspect it.

     5. Before leaving get off work, the operator must carefully clean the automatic rotor winding machine and the surrounding environment, and do a good job of maintenance.