The coil parts of the magnetizer have high requirements

At present, the magnetizer is mainly used for magnetizing small magnets and magnets, which is a function of magnetizing magnets with large magnetizing coils. Since small magnets are generally magnetized at present, the magnetizers used are not so large, but the internal structure is relatively complicated, and motors, magnetizing coils, capacitors, etc. are used. And don't look at it like this. In fact, the requirements of this kind of machinery are very high. Because the principle of electricity and magnetism is used, the magnetization of magnets generally requires the generation of high voltage electricity.

    The coil is also randomly selected. It needs to meet several conditions. One of them is that this kind of coil generates a strong magnetic field around it because it allows current to pass. According to the effect of the stronger the electromagnetic, the stronger the magnetic field, so A coil with extremely low resistance is required. Not only that, this kind of coil generally also needs a water-cooled design, that is, it needs an external cooling device or has a certain cooling capacity. The current water-cooled coil is designed for this magnetizing machine. At present, coils of this type will not be damaged by the overheating of the coils caused by the continuous operation of the motor when they are used in the magnetization. This is the current requirement for the coil components of the magnetizer.